Now that we have a better idea what we're dealing with, we can start rotating things to see what happens.

Fortunately, these cubes come solved. When working with a solved cube, it's much more obvious what is the effect of any transformation, since you can immediately tell (roughly) where each block came from. In order to take advantage of the solved state as long as possible, we start by only making small excursions of 4-8 operations.

Before we can talk about these operations, we need to define a language for describing operations and positions on the cube. We'll start by naming the six directions with their unique first letters:

We now name the elementary rotations by the direction of rotation, subscripted by which layer is turned. Thus, turning the top-most layer to the right is R

Now that we have names, what sort of explorations can we do? Our goal now is to build up a catalog of simple (and hopefully easy-to-remember) operations that make small changes to the cube that are easy to understand and reason about. For instance, a single rotation D

We've seen 6×4=24 named operations, to which we can add 6 more full-cube rotations: O

This is a small sampling of short excursions. In the next installment, we'll look at many more, and discuss some heuristics of how we come up with possible operations and how to represent their effects using cycle notation.

Fortunately, these cubes come solved. When working with a solved cube, it's much more obvious what is the effect of any transformation, since you can immediately tell (roughly) where each block came from. In order to take advantage of the solved state as long as possible, we start by only making small excursions of 4-8 operations.

Before we can talk about these operations, we need to define a language for describing operations and positions on the cube. We'll start by naming the six directions with their unique first letters:

**F**ront,**B**ack,**U**p,**D**own,**L**eft, and**R**ight. Each block can be described by three coordinates, using capitalization as follows: we write 'F' for front-most, 'f' for front-middle, 'b' for back-middle, and 'B' for backmost; and likewise for the other two axes. Thus, the front-top-left corner cube will be called 'FUL', the edge cube directly beneath it is 'FuL', and the face cube to the right of it is 'Ful'. Continuing diagonally right and down the same face we have 'Fdr' and finally the opposite corner 'FDR'. We always use the same order F/f/b/B, followed by U/u/d/D, followed by L/l/r/R, so that each block has a single unique name. Note that corner blocks are all caps, edge blocks are two caps and a lowercase, and face blocks are two lowercase and one capital. A block with all three lowercase is impossible as it would be on the inside of the cube.We now name the elementary rotations by the direction of rotation, subscripted by which layer is turned. Thus, turning the top-most layer to the right is R

_{U}. Turning the next lower layer to the left is L_{u}. Turning the right-most layer down is D_{R}and turning the middle-left layer up is U_{l}. To name the final axis, we use the right-hand-rule: a counter-clockwise rotation of the front layer is F_{F}since this is a right-hand rotation through the F-axis. A clockwise rotation of the middle-front layer is B_{f}. We could name the other four rotations by their axis, but I find the consistency to not be worth the increased confusion.Now that we have names, what sort of explorations can we do? Our goal now is to build up a catalog of simple (and hopefully easy-to-remember) operations that make small changes to the cube that are easy to understand and reason about. For instance, a single rotation D

_{r}affects 12 on four separate faces, which is a bit unwieldy. If we follow it up with R_{d}we've now affected 22 blocks, touching all the faces: even worse. But if we continue with U_{r}and then L_{d}, we arrive mostly back to where we started, but with six face blocks cycled a bit. If we repeat this series of four rotations three more times, we arrive back at a completely-solved cube. Another example is D_{r}R_{D}U_{r}L_{D}. [Note that I write compositions from left to right, which is unconventional from a mathematical point of view—i.e. if you wrote these as functions f and g operating on a state s then one might expect (fg)(s) to mean f(g(s)); but I find this more difficult to read and this leads to more errors in executing operations on an actual cube.] This operation also affects six blocks, but must be repeated more times to return to the initial state.We've seen 6×4=24 named operations, to which we can add 6 more full-cube rotations: O

_{F}, O_{B}, O_{U}, O_{D}, O_{L}, and O_{R}, again using the right-hand rule to determine rotation direction. Note that these are effectively just relabelings: O_{F}U_{r}O_{B}is equivalent to just L_{d}. In this way, one might consider them a sort of orthogonal (or unitary, for the physicists) transformation.This is a small sampling of short excursions. In the next installment, we'll look at many more, and discuss some heuristics of how we come up with possible operations and how to represent their effects using cycle notation.